1.) Apply base coat desired and let fully dry
2.) Apply the vinyls as desired
3.) Apply a thin coat of any desired polish color over the nail & vinyls
4.) Remove the chevron vinyls right away not allowing any dry time and slowly and carefully with some tweezers
5.) Let the chevron dry a few minutes
6.) Apply top coat to seal and protect your design!
Note:
Removing the vinlys right away allows the design to form, than allowing to dry it would be hard to remove them and thus ruining the design. When working with tape you must be careful when removing the tape to not ruin the design desired best to use some tweezers. And lastly allow some dry time before applying top coat to prevent the color to bleed or smear after applying the top coat!
The vinyls can be found on Instagram the creator is Linda @teismom the link to her shop is in her bio! Well what can I say the vinyls are great and easy to work with the adhesive its not to strong to pull of the base coat but strong enough to create the design desired. I love them and highly recomend them!
No comments:
Post a Comment